RENT, SALE, MAINTENANCE OF PORTABLE GAS ANALYZERS VENTIS MX4

UAB EKOBANA IS THE AUTHORIZED REPRESENTATIVE OF INDUSTRIAL SCIENTIFIC CORPORATION (usa)

The Ventis MX4 is a portable multi-gas monitor. Offered as a diffusion monitor, it detects and measures gas(es) present in open space. To enable monitor use within confined space locations, the Ventis MX4 is also offered as an aspirated monitor. A pump module and battery accessories enable the conversion of either monitor for dedicated use in either confined or open spaces. Based on the customer’s monitor order, up to four sensors are factory installed enabling the monitor to continuously and simultaneously detect and measure the presence of up to four specific gases.

Sensor category Number available per monitor Gases monitored
Oxygen 1 O2 (oxygen) only
Combustible 1

Monitor can be configured for sensor to measure ONE of the following: LEL (Pentane), LEL (Methane), CH4 (0%-5%)

Toxic 2

Each sensor detects and measures only ONE of the following: CO (Carbon Monoxide), CO/H2 Low (Carbon Monoxide with low H2 interference), H2S (Hydrogen Sulfide), NO2 (Nitrogen Dioxide), SO2 (Sulfur Dioxide)

Equipped with a multi-mode (audible, visual, and vibration) and multi-level alarm system, the Ventis MX4 monitor is capable of notifying its user of potentially hazardous gas concentrations. The monitor performs continuous data logging at 10 second intervals. It can store approximately 90 days of data for a four-sensor configuration. Its date- and time-stamped event log records and stores data for the following: 60 alarm events, 30 error events, and 250 manually performed calibrations or bump tests. The memory, when full, overwrites the oldest data as the newest readings and events are logged. The Ventis MX4 monitor functions as an independent device to monitor the environment for hazardous gas concentrations. It is compatible with products that charge, calibrate, bump test, read and record instrument data, protect, and otherwise enable or enhance use of the monitor and its data.

MONITOR SPECIFICATIONS

Item Description
Display Backlit Liquid Crystal Display (LCD)
Buttons Two (ON/OFF/MODE and ENTER)
Monitor case Polycarbonate with ESD protective rubber overmold
Alarms Ultra-bright LEDs, loud audible alarm (95dB at 30 cm), and vibrating alarm
Size and Weight Diffusion with Lithium-ion (typical)
Size 103 mm x 58 mm x 30 mm (4.1” x 2.3” x 1.2”)
Weight 182 g (6.4 oz)
Ambient temperature -20 °C to +50 °C

SENSOR SPECIFICATIONS

Gas Name Formula Meassuring range Resolution Accuracy at Time andTemperature ofCalibration Response Time(typical) T50 Response Time
(typical) T90
Oxygen O2 0-30% vol 0.1% vol ±0.5 % 15 30
Carbon Monoxyde CO 0-1000 ppm 1 ppm ±5 % 15 50
Hydrogen Sulfide H2S 0-500 ppm 0.1 ppm ±5 % 15 50
Nytrogen Dioxide NO2 0-150 ppm 0.1 ppm ±10 % 10 30
Sulfur Dioxide SO2 0-150 ppm 0.1 ppm ±10 % 20 80
Combustible LEL 0-100% LEL 1% LEL ±5 % 15 35
Metane CH4 0-5% vol 0.01% vol ±5 % 15 35

CERTIFICATIONS

Certifying Body Area Classifications Standarts
ATEX Ex ia IIC, equipment protection level Ga,
Temperature Class T4;Ex ia I,
Equipment protection level Ma;
Equipment Group and Category II 1G and I M1

EN 60079-0:2009
EN 60079-1:2007
EN 60079-11: 2007

The rent cost for the analyzer for a period of 1 week (with metrological verification):
3 gas configuration:
IndSci Ventis MX4 analyzer (LEL CH4, H2S, O2) - from 110.00 Euro without VAT
4 gas configuration:
IndSci Ventis MX4 analyzer (LEL CH4, H2S, O2, CO) - from 117.00 Euro without VAT

The rent cost for the analyzer for a period of 1 month (with metrological verification):
3 gas configuration:
IndSci Ventis MX4 analyzer (LEL CH4, H2S, O2) - from 231.00 Euro without VAT
4 gas configuration:
IndSci Ventis MX4 analyzer (LEL CH4, H2S, O2, CO) - from 252.00 Euro without VAT 

Analyzer cost (with metrological verification):
IndSci Ventis MX4 analyzer for 3 gases (LEL CH4, H2S, O2) - 775.00 Euro without VAT
IndSci Ventis MX4 analyzer for 4 gases (LEL CH4, H2S, O2, CO) - 860.00 Euro without VAT

Shipping costs are calculated for each individual case separately.

CONTACT US AND WE WILL OFFER YOU THE BEST SOLUTION:

Phone: +370 5 249 1810, email: Aleksej.Perevezencev@ekobana.lt